Cannondale Moterra LT 1 — 2026
Cannondale Moterra LT 1 — 2026
The Cannondale Moterra LT 1 brings together Bosch Performance Line CX, 170 mm / 165 mm suspension, and a moterra lt carbon chassis for enduro / full-power riding.
Why it belongs on the shortlist
Built for riders who prioritize descending control, repeated rough hits, and confidence on steep technical terrain. Its long-travel chassis rewards committed line choice while the drive system keeps high-vertical days moving.
Motor and battery
The Bosch Performance Line CX system delivers Up to 120 Nm with current supported configuration and pairs with a 800 Wh removable PowerTube battery. This configuration puts climbing support and repeatable vertical at the center of the ride.
Real-world range changes with elevation, support mode, rider mass, temperature, surface, tire setup, and battery condition. Use capacity as a comparison point and plan routes with a practical reserve.
Suspension and control
170 mm of front travel and 165 mm at the rear are paired with the FOX 38 Performance fork and FOX DHX Performance coil shock. The 29 front / 27.5 rear wheel configuration supports the bike’s intended balance of rollover, cornering response, and descending stability.
Component highlights
| Frame | Moterra LT carbon |
|---|---|
| Motor | Bosch Performance Line CX |
| Torque | Up to 120 Nm with current supported configuration |
| Battery | 800 Wh removable PowerTube |
| Travel | 170 mm front / 165 mm rear |
| Fork | FOX 38 Performance |
| Shock | FOX DHX Performance coil |
| Drivetrain | SRAM Eagle 90/70 |
| Brakes | TRP EVO Pro four-piston |
| Wheel configuration | 29 front / 27.5 rear |
| Approximate weight | See official page for size-specific weight |
| Color choices | Black |
| US assist configuration | Class 1 US e-MTB configuration |
Fit and sizing
Available size options:
- S
- M
- L
- XL
Start with the manufacturer chart, then compare reach, stack, standover, wheel setup, and dropper insertion. Riders between sizes should decide whether they prefer a more agile cockpit or a longer, more stable feel.
Setup for the first ride
A qualified technician should verify the wheels, brakes, fastener torque, cockpit, suspension pressure, tire setup, firmware, and complete drive-system operation. Fine-tuning sag, rebound, tire pressure, and controls to the rider makes a meaningful difference on trail.
Battery care
Charge with the supplied system in a dry, ventilated area on a stable surface. Inspect the battery and charger before use, follow the manufacturer’s storage guidance, and keep the system away from impact, extreme heat, and water intrusion.
Warranty
Cannondale limited lifetime frame warranty; component terms vary. Refer to the current manufacturer terms for registration, original-owner, component, and territory requirements.
Common questions
What type of rider suits this bike?
Riders looking for a premium enduro / full-power e-MTB with full-power assistance and a technically focused component package.
How should I choose a size?
Use height and inseam as a starting point, then compare geometry and handling preference. A professional fit or test ride is the best final check.